Tribeca 3D
Tribeca 3D consists of 810 × 810 mm (32” × 32”) modules, engineered with three different designs. The three-dimensional effect is created by the bas-relief milling of the fine wood layer, available in Walnut or Oak. Within each module, horizontal, vertical and diagonal lines intertwine to create a dynamic, ever-changing composition. The possibility to combine modules with different designs and to incorporate details in wood or metallic lacquered finishes allows for the creation of highly customised solutions. The elegant, minimalist design makes Tribeca 3D ideal not only for walls, but also for furniture and doors (click here to find out more), creating seamless, coordinated surfaces throughout the design project.
Main uses
- covering for existing walls – wall panelling
- doors for cupboards/wardrobes/made-to-measure furniture
- through doors (swing doors or pivoting doors flush with the wall panelling)
Wall covering
Panels with a layer of high-quality solid wood with 8 mm (0,3”) bas-relief milling in Walnut or Oak. Tribeca 3D is created using individual solid wood elements and is milled exclusively along the grain, to enhance the beauty of the wood. The panels are then assembled and composed in 810 x 810 mm (32” x 32”) elements.
Custom-made furniture
Interior through doors (swing, sliding, pivoting), wardrobe doors and front panels for sideboards can be made using the same distinctive
Tribeca 3D workmanship. The hallmark of the Tribeca 3D panels is that they are smoothed on all four sides, offering greater protection
for the high-quality wood part and preventing inconvenient sharp edges. Furnishings and doors can be created once a careful feasibility
analysis has been carried out by the Foglie d’Oro and Arte Brotto technical department.
Installation
The panels are supplied in the standard size, with a groove-to-groove interlocking system. They can be secured to the walls using wooden strips to enable distancing of the panels, facilitating the normal air circulation and concealing any cables external to the wall.
The wall can be completed using finishing profiles in colours that match those of the wood covering material.
Request more information to receive the data sheet
The door as a décor element
The door defines the transition between rooms, blending into the wood panelling as an integral part of the architectural design. It is more than a mere functional element, becoming a discreet feature that blends seamlessly with the surface. In the Tribeca 3D version in the Colorsense Sky Blue finish, the Relevo wood panelling incorporates the sliding door into a continuous design that flows seamlessly between the wall and the opening. The low-relief milling on the fine wood combines horizontal, vertical and diagonal lines in ever-changing modular patterns, to the point where the door becomes virtually invisible within the panelling.
Available Finishes
3D milling types and intensity
Other 3D Boiseries
Azalea 3D & Azalea 3D Art
Code 3D
Frato 3D
Rail 3D
Nisia 3D
Diamante 3D
Petali 3D
Tricot 3D
Pop 3D
Ombre 3D
Ventaglio Shade 3D
